Newest to the Nutribullet family comes the Nutribullet RX. May be the Nutribullet RX a rebadge of the prior Nutribullet 900 in a shiny new casing with several added features? Have Nutribullet finally first got it right this time around and produced a blender worth dealing with the big brands such as for example Vitamix and Blendtec less price?

As the competition gets hotter between rivalling bullet blender producers – have Nutribullet brought a revolutionary blender to the table?

In Action
To start to see the Nutribullet RX doing his thing against the Vitamix S30, make certain to see our vitamix vs nutribullet showdown.

If like many people, you are tossing up between your Nutribullet and the Ninja Auto IQ, be sure to visit our nutribullet rx vs ninja challenge.

The Good
There is a large amount of good to be said about the Nutribullet RX. Firstly, the email address details are quite impressive and equal those of the Vitamix S30 and Blendtec series. It can an excellent job of liquefying whatever you placed into the container including ice, frozen berries and wearing down seeds no more than linseeds.

The powerful 1700 watt motor creates green smoothies and soups easily. You do have to add water or other liquids to frozen ingredients as the blender does not have any pulse feature, tamper or mechanism to get things moving as long as they become stuck.

The blender includes two cups that screw directly onto the bottom enabling you to blend the smoothie, attach the provided lid – consume or take with you. The main one liter pitcher is a wonderful inclusion – useful when you have a tiny family or anticipate creating large quantities.

A big improvement over previous models is the metal drive socket and gears on the blade housing. The metal makes the blender more durable over cheaper plastic that wears down easily with regular use.

The Bad
The Nutribullet RX is incredibly simple to use. You take your cup and fill it’ll the ingredients to create your master piece. You screw on the lid, tightening it with the provided hand tool and pop it to the base. The bottom senses you have located the cup onto the bottom and automates your blend for 1 minute.

When you are creating soup, you press the disguised button on underneath of the base that may extend the blend cycle for 7 minutes. Once complete the blender will automatically switch off. The base does not have any locking mechanism to carry the cup or pitcher set up so it’s simple to insert and remove.

What so bad about this I hear you say – sound easy enough right? Sure, on the top of things it looks easy. The first problem is that there surely is no On and off switch. Ok.. I hear you say.. Well let’s say you are blending with reduced liquid and things become stuck because they often do in virtually any blender. You’ll have to pull the cup / pitcher off the bottom whiles it running – give it a shake, then reinsert.

If you take away the cup or pitcher at hook angle, you’ll notice a loud grinding noise – which will cause ware and tare as time passes. Occasionally is ok, but suppose you involve some stubborn ingredients that require you to do that often with – it could become quite cumbersome. In addition, it reset the automated timer.

The other complain this is actually the hand tightening tool. In the event that you forget to utilize the tool and tighten yourself, you’ll wrap up with a sticky mess. No other blender requires the utilization of such a tool. In the event you have to move the ingredients around with a spatula, you’ll have to use the tool. If you plan on using the device at all times, you’ll have to use the tool… I believe you get the point…

And The Ugly
There are two major conditions that plague the Nutribullet RX. The first issue is due to the gasket ring. The gasket ring is a rubber ring forms a seal between your cup and the blade housing – made to stop leaks while blending. The gasket has to be removed and cleaned after each use or you risk food contamination.

The problem with the gasket is based on its position. It’s located inside blade housing next to the blades. To eliminate the gasket, you should pry it lose with a dull knife. Once cleaned, reinserting it is usually cumbersome as you will need to stretch the rubber seal, working your fingers around it to obtain it back in place. Doing this isn’t easy and exposes your unprotected fingers to the blades.

Another problem lies with the cooling vent. The powerful 1700 watt motor in the Nutribullet RX can generate some serious heat. It requires dedicated cooling when blending tough things that puts the blender through its paces.

The cooling vent is situated half way up your body of the device. It’s the grid of small holes below the warning messages. When your blender leak during use, spilling liquid over the vent, it’ll be sucked in as there is absolutely no safe guard set up. This may cause serious harm to the motor.

Conclusion
In overall this overview of the NutriBullet RX, I could say the blender performs it job perfectly but has its clear design flaws. If you’re not fazed by fiddling around with the gasket ring or removing the blade housing from the cup with the provided tool – this can be the blender for you personally.

The performance you get for the purchase price you pay is fairly reasonable – in comparison with the major brands such as for example Vitamix and Blendtec. The strongest thing choosing the NutriBullet RX is its capability to purify and pulverise whatever you put before it – rendering it simply perfect for green smoothie and soups.